Bolt.new Pricing in 2026: Plans, Tokens, and Real Costs

Quick answer: As of August 2026, Bolt.new has four plans: a Free tier ($0, capped at 300K tokens per day and 1M per month), Pro (starts at $25/month for 10M tokens with no daily limit), Teams ($30 per member per month, starting at 10M tokens each), and custom-priced Enterprise. The catch is that Bolt bills by AI tokens, not by seats or features, and tokens are mostly spent syncing your whole project to the model on every message - so a big project or a stuck error loop can drain a month's allotment in days. The real cost of Bolt is your subscription plus however many token reloads it takes to actually finish, and that second number is the one nobody quotes you. Verify current numbers on the official pricing page, as Bolt changes them often.

If you have looked at Bolt.new's pricing page and walked away confused, you are not alone. The subscription prices are simple. The thing you are actually buying - tokens - is not, and almost every "Bolt is expensive" complaint online traces back to the same misunderstanding about how that meter runs.

So this guide does two things. First, it lays out every current plan and price in plain numbers. Then it explains the token system underneath, because that is where your real bill comes from and where you have the most control. Read the token section before you pick a plan.

How Much Does Bolt.new Cost in 2026?

Bolt.new is a browser-based AI app builder from StackBlitz that prices by AI token consumption rather than per seat or per feature. Here is the full plan lineup as of August 2026, taken from the official pricing page. Treat these as a snapshot - Bolt has revised both prices and token allotments several times, so confirm the live numbers before you subscribe.

Two things on this table matter more than the headline numbers.

First, Pro is a range, not a single price. The $25 figure is the entry point for 10M tokens per month. Bolt sells higher token allotments up the same Pro tier for power users, and third-party trackers have reported the top of that ladder reaching into the low thousands of dollars per month for very large monthly token counts, per No Code MBA's pricing breakdown. If you are a heavy user, the question is not "Pro or not" but "how many tokens per month," and that is a usage question you can only answer by building for a week and watching the meter.

Second, Teams tokens are per member, not shared. At $30 per person you each get your own 10M starting allotment. That is fine if everyone builds, and wasteful if you are paying for seats that mostly review. Bolt's billing docs spell out how member billing and proration work.

The free plan is a genuine try-before-you-buy, not a usable production tier. 300K tokens a day sounds like a lot until you learn what a token actually pays for, which is the next section.

What Is a Token in Bolt, and How Does Token Metering Work?

A token is the unit of text an AI model processes - roughly a short word or a fragment of a longer one. Per Bolt's own token docs, common words like "I" or "cats" are about one token each, and longer or rarer words cost more. Your Bolt allowance is denominated in these units, and every message you send spends some.

Here is the part that surprises people: most of your tokens are not spent on your prompt. They are spent on context - Bolt syncing your project's files to the model so it can answer with full knowledge of your codebase. Bolt's token-efficiency guide states it plainly: Bolt consumes tokens when it "reads your prompts and project files, thinks, responds to your prompts, and builds in your project." Reading your project files is usually the largest slice.

The direct consequence is that token cost grows with project size, not prompt length. A one-line prompt against a 50-file app can cost far more than a paragraph-long prompt against a fresh project, because the app's whole context ships to the model either way. Third-party estimates put a single interaction at roughly 50K to 150K tokens on a small project and 500K to over 1M on a large one, per No Code MBA. At the high end, a handful of messages can burn through the Free plan's entire daily cap.

A few more mechanics worth knowing before you budget:

• Rollover. On paid plans, unused tokens roll over, but only for two months from the start of their billing cycle, and only while your subscription stays active. Free-plan tokens do not roll over. (Bolt token docs.)
• No daily limit on paid plans. Free is throttled at 300K/day; Pro and Teams remove the daily cap so you can sprint, which is also how people accidentally empty a monthly allotment in a weekend.
• Reloads (top-ups). When you exhaust your monthly tokens, Bolt lets qualifying paid subscribers buy token reloads, and reload tokens do not expire while your subscription is active. Bolt notes the reload price "varies based on your plan," so check your dashboard rather than assuming a flat rate.

That reload mechanic is the hinge of Bolt's real cost. Your subscription buys a monthly allotment. If your project outgrows it - and production projects usually do - the reloads are the rest of the bill.

What Burns Bolt Tokens the Fastest?

If tokens are the currency, this table is where the money goes. These are the drivers that turn a comfortable 10M-token month into a scramble for reloads, drawn from Bolt's own token-efficiency guidance and widely reported user experience.

The pattern is consistent: tokens are spent on context and on retries, not on typing. The single most expensive habit is hammering the "Attempt Fix" button when the AI is stuck, because each attempt bundles your entire codebase again and the model often loops on the same wrong idea. That one behavior is behind a large share of the shock bills you read about. For the full picture of where Bolt helps and where it fights you, our Bolt.new review walks through the day-to-day experience.

What Does Bolt.new Really Cost Once Tokens Run Out?

Here is the gap the pricing page does not show you. The subscription is the floor, not the price.

Picture a realistic Pro month. You are on the $25 plan with 10M tokens, building a genuine app - auth, a few screens, a couple of integrations. For the first week the meter feels generous. Then the project grows past a dozen files, you hit a bug the AI cannot shake, and a few "Attempt Fix" loops later you have spent a third of the month's tokens in an afternoon. By week three you are out, staring at a reload prompt. The $25 plan quietly became a $25 plan plus reloads, and the total depends entirely on how hard the last 30 to 40 percent of your app fights back.

This is the same trap that runs through every usage-metered AI builder, and we mapped it in detail in AI app builder pricing and the hidden costs. The headline price answers "what does it cost to start." The real question is "what does it cost to finish," and for Bolt that answer is: your plan, plus reloads, scaled by your project's size and how many error loops you walk into.

None of this makes Bolt overpriced. Token billing is honest in the sense that you pay for what the model actually does. But it is unpredictable in a way seat-based pricing is not, and the unpredictability lands hardest exactly when you can least afford it - late in the build, when the app is almost done and every debugging round is expensive because the codebase is now large. Budget for the reloads from the start, or the "cheap" plan surprises you at the worst moment.

How Do You Keep Bolt Token Spend Under Control?

You have real leverage here, and most of it is habits rather than settings. Bolt's token-efficiency docs are worth reading in full, but the moves that matter most are these.

Stop re-clicking "Attempt Fix." When the AI is stuck in an error loop, each attempt resends everything and often repeats the same wrong guess. Read the error yourself, or roll back with Version History (which costs no tokens) and try a different, more specific prompt. This single discipline saves more tokens than everything else combined.

Plan in Plan mode, build in Build mode. Thinking is cheaper than building. Use Plan mode to work out architecture and approach, and only switch to Build once the plan is settled. Do not use the expensive mode to brainstorm.

Keep the project small and clean. Because context scales with file count, dead code is a recurring tax you pay on every single message. Delete unused files, and split genuinely separate features into separate projects so each one ships less context to the model.

Right-size the agent. Use the Standard agent for routine work and save the Max agent for the hard problems that actually need it. Running Max on a button-color change is pure waste.

Write specific prompts. Every fuzzy request that triggers a clarifying round resends your context. A precise prompt that lands in one turn is cheaper than three vague ones that each reload the codebase.

Do these consistently and a 10M-token month goes noticeably further. Ignore them, especially the fix-loop one, and no plan tier will feel like enough.

Which Bolt.new Plan Fits Which User?

Plans are only useful mapped to who should buy them. Here is the honest read, with the wall each user should expect to hit.

The honest limitation across every tier is not the price. It is that Bolt, like all AI builders, gets you to a convincing demo fast and then leaves the hard part to you. Real authentication, row-level security so one tenant can never read another's data, integration failure handling, and production deployment are the classic 30 to 40 percent that stalls, and no Bolt plan finishes it for you - it just gives you more tokens to attempt it yourself. If you are weighing Bolt against the field on exactly this, Bolt.new vs Lovable and our best vibe-coding tools of 2026 compare where each one hits the wall. And if Bolt's token model is the dealbreaker, Bolt.new alternatives in 2026 lays out the options with different pricing shapes.

Where Creatr Fits

Creatr is not a plan on the table above, because it is not a tool you meter and operate yourself. We build, host, and run production-grade software for you, with the first build shipped in 24 hours, humans in the loop, and code you own outright.

The reason we exist is the exact gap this whole guide circles. Bolt and its peers are genuinely good at the first 60 to 70 percent, and their token pricing is fair for that stretch. The pain starts in the last 30 to 40 percent - real auth, tenant isolation, integrations that survive failure, and getting the thing deployed and running - which is also, not coincidentally, where token bills spike because that is when your codebase is largest and every debugging loop is most expensive. Creatr delivers that whole slice finished, so you are not the one buying reload after reload to fight a stuck error loop at the end of the build.

On cost, we will not claim to be cheaper than a Bolt subscription, because they are different purchases: Bolt sells you a metered tool and your own time, and we sell you a delivered, running product. If your project is a prototype for a few trusted users, a Pro plan and a disciplined finger off the "Attempt Fix" button may be all you need, and you should not overpay for more. If you want the production version delivered rather than a meter to manage, start with Creatr. Either way, read the token section above before you subscribe to anything - it is the part of Bolt's price that actually decides your bill.